Chamfer Callout On Drawing
Chamfer Callout On Drawing. To insert chamfer dimensions into a drawing: In the drawing, go to the annotate tab, select the show model annotations icon, make sure dimension is selected in the pop up and select the chamfer, it will show your dimension.
Often a chamfer callout will have a tolerance associated with the angle and a break edge will not. Hello, i've been trying to locate the chamfer callout dimensioning tool. Click chamfer dimension on the dimensions/relations toolbar or click tools > dimensions > chamfer.
An Engineering Drawing Should Convey The Following Information:
To insert chamfer dimensions into a drawing: You must select the chamfered edge first. If no angle is given the chamfer is assumed to be at 45 degrees.
Click Chamfer Dimension On The Dimensions/Relations Toolbar Or Click Tools > Dimensions > Chamfer.
If you have created the chamfer as angle x d, then the dimension appears at an angle. Chamfers can also be specified by giving both legs of the chamfer such as: My chamfer which is.25 x.25 is being called out as.50 x.50 on a 2:1.
Sometimes I Also Make A Hole With The Hole Command Without A Chamfer, And Then Add The Chamfer Later With A Second Command.
I have been using this style for many years with multiple companies and drafting programs and have never questioned it. Solidworks 2005 sp01.1 intel xeon 2.8ghz 2gb ram nvidia quadro fx700 128mb Often a chamfer callout will have a tolerance associated with the angle and a break edge will not.
If So, Don't Go Back To The Model.
It is not uncommon on japanese drawings to see c1 or r2 for a 1mm chamfer or 2mm fillet radius. Meaning you cannot have one chamfer called out as angle by distance and another called out as equal distance or distance by distance. When the chamfer has to be toleranced, then one has to add the allowed deviation (e.g 0,3±0,2x45°).
You Can Change The Default Scheme At Any Time In Your Design Session To Achieve The Preferred Chamfer Geometry Using The Dimension Scheme Box On The Edge.
The chamfer properties dialog box opens. When dimensioning a chamfer on a parts drawing, according to iso, one has to show the height of the chamfer and the angle of the chamfer (e.g 0,3x45°). Y14.5 clearly says a note 1 x 1 or 1 x 45° is allowed.